Occupational Health
and Safety of Employees
Customers
Business Partners
Regulators
AOT Employees
Community and Society
Various activities from construction to airport operations rely on employees and business partners, e.g., contractors and partners. Therefore, good occupational health and environmental management is extremely important and directly affects valuable organizational resources. Without good occupational health and safety, accidents causing injuries and loss of employees and contractors may occur. It may also indirectly affect customer service, and community, as well as violate the requirements of regulators, leading to violation of human rights regarding the right to life and safety.
Policy
AOT operates with responsibility for the occupational safety of the stakeholders. As a result, the Occupational Health, Safety, and Work Environment policy has been issued. The Safety and Occupational Health System Management manual including work safety regulations and manuals for contractors are used as guidelines for employees and all of AOT’s contractors, covering those at AOT’s airports and Head Office.
Occupational Safety and Health, and Workplace Environment Policy
Management Approaches
AOT prioritizes safe working environment in compliance with occupational health and safety principles in all 6 airports of AOT and the Head Office. This is the core principle of airport operations where all personnel working under AOT’s premises must comply with. Currently, Occupational Health and Safety Management System of AOT Head Office and all 6 airports have been certified by ISO 45001:2018 Standard. This management system will enable occupational health and safety management of AOT to achieve the safety and management of international standards.
Duty and Responsibility
AOT requires 6 airports and its Head Office to set up the responsible persons for occupational health and safety with duties and responsibilities as follows:
President
Define policy, objective, and target on occupational health, appoint relevant committees and working groups, allocate resources, and monitor as well as supervising the operations.
Safety and Occupational Health Management System Committee
Support the auditing of management system, identification, and assessment of risks, and participate in setting up objectives, targets, and occupational health projects.
Vice President (Department Level), Supervisor, and Assigned Personnel
Supervise the compliance of occupational health laws, regulations and practice guidelines as well as approving the projects, and setting up related key indicators.
Representatives of Safety and Occupational Health Management System Department
Supervise works of the occupational health and safety management system, audit internal processes and report the results to the management.
Safety, Occupational Health and Work Environment Committee
Consider policy and define work plan, provide suggestions on measurements and projects, assess risk in work environment, analyze occupational health statistics, and report operational results to the management on an annual basis.
Work Safety Officer
Supervise safety and environmental issues on site, verify the conditions of equipment and tools, provide knowledge, report incidents and sickness, and support safety activities.
AOT’s Safety, Occupational Health and Work Environment Committee (SHE Committee) performs 11 duties and responsibilities as stipulated in the Ministerial Regulation on the Prescribing of Standard for the Administration and Management of Occupational Safety, Health, and Environment B.E.2549 (2006). The committee’s structure is composed of Chairman (appointed by the employer), Professional Safety Officer who acts as committee member and secretary, representatives of the employers at the executive level (appointed by the employer), and representatives of the employees from all levels (elected). The Committee meeting is held for at least once a month to acknowledge operation results and provide suggestions on occupational health measurements in order to continuously enhance management efficiency.
Standard Operation Procedure
AOT specified the Standard Operation Procedure as a guideline for the systematic operation of occupational health and safety and requires the operator to hold meetings with the human resources department with the Board of Directors to report the operational situation on a regular basis.
AOT’s Standard Operation Procedure covers the following topics
- Hazard identification and risk assessment
- Management of Harm from psychological and social factors at work
- Management of compliance with occupational health and safety laws and requirements
- Determination of objectives and plans for occupational health and safety
- Specification of competencies, training, and awareness
- Communication, engagement, and counseling
- Document and record control
- Practice control
- Change management
- Procurement and contractor control
- Emergency preparedness and response
- Monitoring of safety practice
- Monitoring, inspection, and assessment of occupational health and safety practice
- Management system evaluation
- Management system review by executives
- Accident and incident investigation
- Remediation and prevention
Overview of the Occupational Health, Safety and Work Environment Management
Hazard Identification and Risk Assessment
According to the planning requirement of the Occupational Health and Safety Management System Standard or ISO 45001:2018, AOT applies the hazard identification and risk assessment process in each activity and work environment. The process is regularly reviewed at least once a year by the assigned person of each department together with the safety officers. The result of which is reported to the Occupational Health and Safety System Management Committee and senior executives which shall be used to define the Hierarchy of Controls, as follows:
In the case of witnessing a hazardous work environment, the operator at all levels can participate in reporting the risks and concerns that arise at any time to the SHE Committee to assess and solve the situations. Reporting on hazardous incidents, risks and opportunities is considered as an operation for improvement, remediation, and development of the occupational health and safety management system.
Incident Investigation
In case there is any occurrence of incidents, AOT would activate the investigation procedures, as follows:
Occupational Environment Assessment
AOT determined the occupational environment assessment of employees and workers on a regular basis. The departments responsible for occupational health and safety and work environment each airport must inspect and monitor the work environment to be consistent with the related laws and standards on occupational health, safety and work environment, covering indoor environment quality, e.g., temperature, humidity, light, noise, dust particle, and airborne bacteria and fungi in the air.
Medical Services
AOT provides medical clinics at every airport including the Head Office for preliminary treatments for employees and operators in AOT’s premises in case of illness or injury while working. AOT also provides employee’s annual medical check-up and medical benefits to ensure of good health and well-being of employees.
Training for Specific High-Risk Workers
According to AOT's requirements, contractors who work with specific risks must receive relevant trainings and/or high risk work licenses such as working with cranes and forklifts, working at height, working in a restricted area or an area relating to fuel or in a confined space, working with hazardous chemical or relating to a highly radioactive material or generating heat and sparks, such as cutting, welding, grinding, etc.
Safety for Contractors
AOT has prepared and published regulations and manual on safety at work for the contractors to be used as complete and correct safe operating guidelines, as required by law, which controls risk that may occur due to contractors’ operations and create positive safety outcomes for all staff and external contractors working in AOT's premises. The contractor's operating terms and conditions in compliance with occupational health and safety requirements and suppliers' sustainable practices have already been clearly stated in the Term of Reference (TOR) and communicated with workers to follow the safety standards each time before starting work. At present, AOT requires contractors to report safety statistics and performance on a monthly basis through the information system regarding the management of safety information for contractors. The guidelines can be summarized as follows:
See more details
Promote a culture of Occupational Health and Safety
AOT promotes safety and fosters a safety culture in the organization by providing trainings and campaigns to educate new and current employees on basic safety standards as required by the law: such training were basic safety at airports and emergency plans, fire drills, including occupational health and safety management system training other than those required by the law, such as operation trainings to operate in accordance with ISO 45001:2018 standards and supervisors’ training to supervise contractors, etc.
Fire Fighting and Evacuation Fire Drills Project
Fire fighting and evacuation fire drills is a mandatory safety activity that AOT arranges every year in all of its airports and the Head Office, according to the Ministerial Regulation on the Standard for Administration and Management of Occupational Safety, Health and Environment in relation to Fire Prevention and Control B.E. 2555 (2012). This is to ensure that all employees have knowledge and understanding of how to act in emergency situation, while related officers and responsible persons can develop their management skills for dealing with a fire situation.
Management Evaluation
AOT organizes an audit according to the Internal Audit on Safety and Occupational Health Management System, conducted by the Occupational Safety and Health Department together with a group of internal auditors from every department, who have been trained the auditor training courses, and external auditor from independent units in accordance with ISO 45001: 2018 standard. The safety agency reports the results of audit and accreditation on the Occupational Health and Safety Management Standards to senior management in order to review and define measures for further development of safety, occupational health and work environment operations and also discloses the performance to the public in AOT Sustainable Development Report.
Last Updated: April, 18 2023